Part Numbers are listed for camshafts ready for
finish cam lobe grinding: All cores are made from bearing quality 8620 steel
unless otherwise noted. All distributor gears are hobbed to high accuracy on
machines in our gear shop. Heat treatment of cam cores is then done
according to Andrews' stringent specifications with full certification.
LS1 Corvette Cams (with shoulder step)
Centerline
Part#
Brg. D.
Shaft D.
Lobe D.
Max Lift
Step D.
Dur@.05
angles can
be setup in
80040017
2.166
1.250
2.195
0.430
1.565
264/268
LS1 engines.
Many different custom
lobe designs can be milled onto LS1 cam blanks.
Camshaft cores can be supplied after any stage of completion: as bar stock
slugs, turned spools,
with gear teeth, heat treating, bearing grinding and also complete with
finished ground cam lobes.
Special cam blanks (reverse rotation, 180 firing order, etc.) can be
quoted as custom items.
Call for pricing and
delivery information.
Copyright Š 2006, All rights reserved.
Andrews Products, Inc.
431 Kingston Ct.
Mount Prospect, IL
60056
